Industrias DOJE

Industrias DOJE

Industrias DOJE

Tuesday, 24 October 2017 08:52

Advertising products works

It is well known that Industrias Doje, S.L. injection die casting covers a wide range of sectors, such as: advertising, automotive, cosmetics, lighting, locksmithery, hardware, bath accessories, gas, fittings for furniture, costume jewelery, hand tools, ...

As will be known Sedesma Inyectados, S.L., has been declared in voluntary competition. Industrias Doje has acquired part of the molds in order to continue with the publicity work they have been doing so far: Keyrings, pins, badges, badges, magnets, bracelets, medals, coins, accessories, figures, pendants, bottle opener, stickers , paper hangers, paperweights, sculptures ...

We want to take this opportunity to show you that we are at your disposal to help you and advise you on the creation of new parts. For this reason, we will collaborate in solving your doubts and needs.

 

Wednesday, 30 March 2016 09:14

10 REASONS TO CHOOSE DIE CASTED ZINC

1. Natural and environmentally sound

Zinc is a part of the cycle of nature, and can be reused. Zinc melting point is low compared to most other materials. Thus the energy consumption when die casting zinc is reduced.

2. Great creativity

Die casted zinc meets the demand for creativity in the construction and design process. Several parts can be integrated into one common casted part. Self lubricating characteristics of the zinc alloy is used to avoid the use of lubrication bearings. For the benefit of total costs.

3. Surface finish advantages

A lot of surface coating options are available in order to add more attractive aesthetic and functional characteristics to the zinc parts.

4. Low price

Long lasting durable zinc die casting moulds and fully automated production keeps the costs down.

5. Strong characteristics

Die casted zinc parts have a high mechanical strength, elasticity and impact ductility. Often die casted zinc parts are a better choice than for example parts in aluminium, plastic or milled parts.

6. Reduced weight

Zinc is heavier than aluminium and magnesium, an advantage if you need a heavier component such as a lamp support. On the other hand die casted zinc parts can be optimized, and the weight reduced considerably – without affecting the strength and complexity.

7. Precise and complex

Die casted zinc can have very small wall thickness, and very narrow tolerances make it possible to cast parts ready for installation of bearings. Precise and very small details can be included in the casting – even in complex geometries.

8. Good conductive abilities

Die casted zinc has good electric and heat-conducting characteristics. An advantage if you have a high demand for heat transfer, but have limited space, as example in LED lighting systems.

9. Sound absorbing

Die casted zinc is sound absorbing therefore it is used for mechanics with movable parts, chains or the like. As example in remote window control systems, where noise should be minimized.

10. Protection shield

Die casted zinc has built in EMC protection. The shielding properties are optimal compared to traditional metal sheet solutions.

source: linimatic

Tuesday, 20 October 2015 12:57

Alloys Used in Die Casting

As a fabrication process, die casting is notable for its capacity to manufacture parts with a high degree of uniformity, close design accuracy, and quality surface finishes. In many cases, die casting can reduce or eliminate the need for post-production machining, raising the cost-efficiency of the process and shortening fabrication time. While it may be difficult to die cast sturdier metals, such as certain grades of steel, there are many other types of alloys well-suited for die casting methods.

Advanced course organized by TEDFUN

On February 19 DOJE INDUSTRIES , SL He attended the course Advanced Course Design Injection Mold held in Zaragoza organized by TEDFUN and counted with the participation of TECNALIA and company analysis and simulation . The course , aimed at Heads of Production, Quality Technical Staff , Technical Office , production or maintenance was primarily aimed at advanced training for mold design non-ferrous die casting , based on a case study simulation for a piece of aluminum injected.

DOJE INDUSTRIES S. L. , wishes to thank all the visitors that have come to our booth at SUBCONTRATACIÓN 2015 (Bilbao) the days 26, 27, 28,  and October 29 and have been interested by our services consists of cast Zamak and aluminum.

We would also like to thank all our customers for letting us share some of their pieces of zamak and aluminum, and also by his visit.

For those who want more information on industries DOJE S. L. , will leave you this link where you can download a Power Point presentation of our activity focused on the production of parts by injection in aluminum alloys and Zamak.

Download presentation 1.8mb

 stand doje

Among the upcoming Days 26th to May 29th, 2013 on the premises of the Bilbao Exhibition Centre in the city of Bilbao, is being held, the fair interpresarial outsourcing and Cooperation "Outsourcing 2015 Bilbao" is the only sector International Fair in Spain and a Top of Europe.

This year will be given appointment Doje Industries with the best companies and professionals where we will show our latest developments and innovations.

For this reason, we invite you to visit us at our booth that will be located in Hall 5, F37.

If you are interested in visiting, I remind you that you have at your fingertips the registration form for easy access to the fair.

Access to the free registration form

Thursday, 09 April 2015 09:25

Composition of casting zamak

Zinc alloys foundry under pressure are the most common zamak zamak 3 and 5. They are transformed into hot chamber die casting. Other alloys with higher aluminum content (ZA8, ZA12, ZA27, ...) are much less used.

Composition

Zamak alloyZamak 2Zamak 3Zamak 5ZA 8ZA12ZA27
Designation ZP0430 ZP0400 ZP0410 ZP0810 ZP1110 ZP2720
Standard ZP2 ZP3 ZP5 ZP8 ZP12 ZP27
Symbol ZnAl4Cu3 ZnAl4 ZnAl4Cu1 ZnAl8Cu1    

Former name:

The former name was zinc alloys:

ItemZamak 2Zamak 3Zamak 5ZA 8ZA12
France Z-A4U3 Z-A4 Z-A4U1 Z-A8U1  
UK   Alliage A Alliage B    
Germany Z430 Z400 Z410    
Italy ZnAlCu3 G-G-ZnAl4 G-ZnAl4Cu1 G-ZnAl8Cu1 G-ZnAl11Cu1
USA AG43A AG40A AG41A ZA8 ZA12

Terms zamak 3, Zamak 5 ZA8, ZA12 and ZA27 are very commonly used worldwide in both Europe and the US. The name zinc alloys (foundry under pressure) is more "standardized" global than that of aluminum alloys (Al Si9Cu3 A380 in Europe and the USA). Probably due to a greater historical age of the industrial use of zinc alloys.

Functional properties

Zamak alloyZamak 2Zamak 3Zamak 5ZA 8
Standard ZL2 ZL3 ZL5 ZL8
Symbol ZnAl4Cu3 ZnAl4 ZnAl4Cu1 ZnAl8Cu1
Density 6.8 6.7 6.7 6.3
Interval 379-389 382-387 379-388 375-404
Conductivity 119 113 110 115
Coeff dil 2.7.8 27.4 27.4 23.2
Cond IACS 25 27 26 27.7
Young mod 119 113 110 115
Rm (MPa) 355 330 355 370
Rp0.2 (MPa) 270 200 250 220
Fatigue 60 56 60 100

(*) Coefficient of thermal expansion (.mu.m / mK)
CThermal conductivity (W / mK)
Rm - Tensile strength (MPa)
Rp0.2 - Yield strength (MPa)
Fatigue Fatigue resistance (10 cycles E8 MPa)

Fuente: My little blog fonderie

Monday, 16 February 2015 07:38

Zamak in jewelry

As you know there are many types of materials for jewelry pieces . But today we pay attention to one in particular that has shown great results , come and compact shape , so that we can acquire and simply add it to our room. We speak of Zamak .

And what is the zamak ? You see, it is a material made from zinc alloy , aluminum, magnesium and copper. It is hard and tough, and can be found in lots of ways for your beads.

Ideal for jewelry because with the passage of time is not damaged, you may lose some luster but does not deteriorate or is aged with use unlike other materials. Compared to silver, Zamak besides being cheaper is not dirty with use. And compared to metal, Zamak no breaks or gets ugly with the passage of time, is lighter than steel and almost has the same resistance. This does not mean that there do not care for it, but it is more durable and attractive than other materials.

Source : abedulart

Monday, 15 December 2014 10:35

The Importance of Die Casting Services

The North American Die Casting Association says on its website that it considers metal casting to be “America’s most fundamental industry.” It’s not surprising that a metal casting trade association would describe die casting services as fundamentally important, and it’s likely that other trade associations for other sectors of industry would dispute the NADCA’s claim. But there’s no denying that casting is an essential element in our industrial infrastructure.

The NADCA sites some reasons for why it considers its members’ products to be so important to American industry. According to them, 90% of all finished American manufactured products involve metal castings in some way. They say also that die casters make a $7 billion annual contribution to the country’s economy, and that the die casting industry employs 50,000 workers in direct and indirect capacities.

A lot of operations within commercial and industrial sectors rely on access to cast metal products. These operations range from advanced, high-tech operations such as aerospace manufacturing and medical products companies, to low-tech consumer products manufacturers, such as lawn care products manufacturers. You can find metal castings in space ships and in toy models of space ships. They can be found at all levels of industry and commerce in an extensive variety of products and contexts.

Die casting in particular is considered to be a comparatively sustainable metal forming process. According to the NADCA, more than 95% of North American die castings made of aluminum are composed of recycled aluminum. This reduces the need for new aluminum mining, and it also reduces the amount of aluminum that finds its way into waste areas like landfills. This also makes the process more economical. Additionally, scraps produced during the die casting process can often be recovered, melted down and then used in future casting. Considering all of these factors, it’s possible that the NADCA might just be right in its claim about the importance of die casting.

Source: IQS 

Monday, 29 September 2014 13:18

Surface finishes

A variety of high quality surface finishes is another major advantage

Electro-Plating

Zinc die castings offer excellent plating characteristics. Electro-plating is generally a multi-layered coating consisting of one or two copper layers, one or two layers of nickel, and a final layer of chromium, brass, gold, or any other platable metal. Chromium plating is the most popular decorative finish when corrosion and high abrasion resistance are required.

Chrome plating adheres best to the ZAMAK alloys and ZA-8 followed by ZA-12. Chrome plating of ZA-27 is possible but more difficul due to the need to treat ZA-27 like an aluminum casting. Processes which provide a smooth, dense outer skin such as pressure die casting and permanent mold casting are preferred when plating is being considered.

Chromates

Chomating is a low-cost chemical treatment that provides additional corrosion protection against « withe rust ». This form of zinc corrosion is caused by prolonged exposure to damp conditions. Chromate finishes are produced by simple dip methods which deposit a thin chromate coating. Chromate coatings are often applied to instrument, military and automotive components where low cost resistance to moisture is required. These coatings normally have a bronze tone or metallic lustre depending on the process used.

Phosphates

Phosphate coatings are primarily used to provide a good base for painting or powder coating.

Anodizing

A special zinc anodizing treatment is avaliable for zinc castings. This coating is completely different than that for aluminum alloys. Zinc anodizing is a functional coating providing maximum corrosion resistance in atmospheric and marine environments.

Since the process uniformly coats deep recesses and threaded areas, anodized zinc alloy casting can serve as an economical alternative when replacing traditional brass, bonze and stainless steel components.

Polishing and Brushing

Conventional high lustre polishing or brush finishing techniques can produce appearances similar to chrome plating or stainless steel. When lacquered, these finishes are suitable for decorative, interior applications.

Painting

All zinc alloys form an excellent base for paints. To aid paint adhesion, phosphate or chromate pretreatments are often employed. Zinc alloys can also be elctrostatically painted.

Powder Coatings

Powder coating involves electrostatic spraying of the zinc castings with an epoxy or polyester powder. The parts are then immediately oven cured for a hard dureble finish. The result is an even, inexpensive, corrosion resistant plastic coating. Powder coatings are avaliable in a wide range of colours.

Source : Interzinc

Page 2 of 5

Blog